TECHNOLOGICAL CAPABILITIES OF EFFICIENT USE OF ADDITIVE TECHNOLOGIES IN MANUFACTURE OF MACHINE PARTS

Recommendations on equipment selection are made, theoretical considerations on designing 3D printer for manufacture of parts by additive technologies are presented, and examples of parts and their application in machine building are given. The experimental model of the printer named TECHNOTOP RUDN is proposed: it has the best price/quality ratio, simple in use, has improved configuration and is an optimal alternative for discrete application. The strength and precision of the machine tool are analyzed as functions of the type of transmission, step motors, their capacity and operating modes. Thermal experiments and calculations of extrusion machine with a thermal barrier made of different materials are carried out. The pressing problems are solved, as well as defects and nuances of program settings during 3D printing are identified.

Keywords

Additive technologies, thermal experiments, printing techniques, selective laser sintering, direct material settlement, thermal barrier, material extrusion, thermal conduction, conventional technologies, three-dimensional printing.

Issue number: 8
Year: 2018
ISBN:
UDK: 621.91.002
DOI: 10.25018/0236-1493-2018-8-0-156-162
Authors: Haba Etienne, Timiryazev V. A.

About authors: Haba Etienne, Magister, е-mаil: habatino@yahoo.fr, Timiryazev V.A., Doctor of Technical Sciences, Professor, е-mаil: timwa38@mail.ru, Peoples’ Friendship University of Russia (RUDN University), 113093, Moscow, Russia.

REFERENCES:

1. Valetov V. A. Additivnye tekhnologii (sostoyanie i perspektivy): uchebnoe posobie [Additive technologies (current condition and prospects: Educational aid], Saint-Petersburg, Universitet ITM, 2015, pp. 63.

2. Goryachiy V. V. Povyshenie nadezhnosti neftegazovogo oborudovaniya primeneniem 3D-pechati [Improvement of oil&gas industry equipment reliability using 3D printing]. Innovatsii i investitsii. 2015, no 11, pp. 150—152. [In Russ].

3. Baumann F. W., Eichhoff J. R., Roller D. Scanned Image Datafrom 3D-printed Specimens Using Fused Deposition Modeling. Data 2017, № 2, P.3.

4. Logacheva A. I., Sentyurina ZH. A., Logachev I. A. Additivnye tekhnologii proizvodstva otvetstvennykh izdeliy iz metallov i splavov (obzor) [Additive technologies for manufacture of critical products from metals and allows (review)]. Perspektivnye materialy. 2015, no 4, pp. 5—16. [In Russ].

5. Yang C., Shen W., Lin T., Wang X. A hybrid framework for integrating multiple manufacturing clouds. Int. J. Adv. Manuf. Technol. 2016, № 86, 895—911.

6. Timiryazev V. A., Skhirtladze A. G., Melet'ev G. A., SHebashev V. E. Osnovy tekhnologii mashinostroeniya: uchebnik [Fundamentals of engineering technology: Textbook], Yoshkar-Ola, PGTU, 2016, 424 p.

7. Marants A. V. Sravnenie svoystv materialov stal'–TiC, poluchennykh metodami lazernykh tekhnologiy i poroshkovoy metallurgii [Comparison of properties of steel–TiC materials produced using laser technologies and powder metallurgy]. PMiFP. Izvestiya vuzov. 2013, no 1, pp. 22—26. [In Russ].

8. Dovbysh V. M., Zabednov P. M., Zelenko M. A. Additivnye tekhnologii i izdeliya iz metalla [Additive technologies and metal-work], available at: http://nami.ru/upload/AT_metall.pdf (accessed 10.03.2015).

9. Mark Curles German selective laser melting specialist mulls IPO. Industrial laser solutions. 15.08.2014.

10. Balyakin A. V., Chempinskiy L. A., Smelov V. G. Primenenie additivnykh tekhnologiy dlya sozdaniya detaley kamery sgoraniya [Application of additive technologies in manufacture of combustion chamber parts], Vestnik Samarskogo gosudarstvennogo aerokosmicheskogo universiteta. 2012, no 3 (34), pp. 47—52. [In Russ].

11. Galkin V. I., SHeshko E. E. Perspektivy razvitiya transportnykh sistem v glubokikh kar'erakh [Prospects for development of transport systems in deep open pit mines]. Gornyy informatsionno-analiticheskiy byulleten'. 2018. Special edition 1, pp. 369—379. [In Russ].

12. Chumakov D. M. Perspektivy ispol'zovaniya additivnykh tekhnologiy pri sozdanii aviatsionnoy i raketno-kosmicheskoy tekhniki [Prospects for application of additive technologies in aeronautical and rocket-andspace engineering]. Trudy MAI. 2014, no 78, pp. 22. [In Russ].

13. Boparai K. S., Singh R., Singh H. Development of rapid tooling using fused deposition modeling: Areview. Rapid Prototyp. J. 2016, no 22, Pp. 281—299.

Our partners

Подписка на рассылку

Раз в месяц Вы будете получать информацию о новом номере журнала, новых книгах издательства, а также о конференциях, форумах и других профессиональных мероприятиях.