Теоретические исследования бункер-перегружателей с гравитационной загрузкой

The formulated problem is to enhance roadway construction efficiency and environmental safety using continuous mining technology with batch-action bunker loaders. The object of the research is the bunker loader with the hydraulically driven batch-action carrier. For feeding the bunker loader, the proposed engineering solutions include the varied angle of chute to ensure gravity feeding. The method of determination of actual bulk volume in the bunker loader chute during gravity feeding is substantiated to develop an engineering selection procedure of its rational parameters. The main behavioral patterns of bulk material are found, the quantitative and qualitative relations are obtained to determine actual bulk volumes as function of inclination angle , type of material characterized with the repose angle  , chute surfacefriction angle  and internal friction angle  . The final mathematical model of the listed characteristics represents a system of equations in the form of an algorithm and a control flow chart. The testing and calculation data are analyzed. The physical pattern of the granular material behavior in gravity feeding of a bunker loader is studied. The research conclusions are drawn.

 

Keywords: continuous mining, bunker loader, granular medium interaction, friction angle, bunker volume, gravity feeding, stockpiling, rational inclination angle.
For citation:

Nosenko A. S., Domnitsky A. A., Nosenko V. V., Zubov V. V., Kirsanov I. A. Theoretical study of bunker loaders with gravity feeding. MIAB. Mining Inf. Anal. Bull. 2022;(8): 111-120. [In Russ]. DOI: 10.25018/0236_1493_2022_8_0_111.

Acknowledgements:
Issue number: 8
Year: 2022
Page number: 111-120
ISBN: 0236-1493
UDK: 622.619.7
DOI: 10.25018/0236_1493_2022_8_0_111
Article receipt date: 13.12.2021
Date of review receipt: 25.06.2022
Date of the editorial board′s decision on the article′s publishing: 10.07.2022
About authors:

A.S. Nosenko1, Dr. Sci. (Eng.), Professor, e-mail: asnosenko@mail.ru, ORCID ID: 0000-0002-9345-7709,
A.A. Domnitsky1, Dr. Sci. (Eng.), e-mail: dom-a-a@mail.ru, ORCID ID: 0000-0001-9400-3365,
V.V. Nosenko1, Cand. Sci. (Eng.), Assistant Professor, e-mail: vvnosenko@mail.ru, ORCID ID: 0000-0003-3003-8440,
V.V. Zubov1, Senior Lecturer, e-mail: dyadkazub0@rambler.ru, ORCID ID: 0000-0002-3629-8545,
I.A. Kirsanov1, Assistant, e-mail: hexomen@rambler.ru, ORCID ID: 0000-0002-6632-904X,
1 Shakhty Automobile Road Institute, Branch of the Platov South-Russian State Polytechnic University (NPI), 346500, Shakhty, Russia.

 

For contacts:

A.S. Nosenko, e-mail: asnosenko@mail.ru.

Bibliography:

1. Khazanovich G. Sh. Actual directions of scientific research of mining equipment. Mining Equipment and Electromechanics. 2018, no. 2, pp. 41—45. [In Russ].

2. Zhabin A. B., Polyakov A. V., Averin E. A., Linnik Yu. N. Design basis for tunnel boring machine cutter heads. MIAB. Mining Inf. Anal. Bull. 2019, no. 6, pp. 156—164. [In Russ]. DOI: 10.25018/0236-1493-2019-06-0-156-164.

3. Voronova E. Yu., Khazanovich G. Sh. Methodology of parametric optimization of aggregated tunneling systems. Mining Equipment and Electromechanics. 2020, no. 5, pp. 16—21. [In Russ]. DOI: 10.26730/1816-4528-2020-5-16-21.

4. Rostami J., Chang S. H. A closer look at the design of cutterheads for hard rock tunnel-boring machines. Engineering. 2017, vol. 3, no. 6, pp. 892—904. DOI: 10.1016/j.eng.2017.12.009.

5. Han M. D., Cai Z. X., Qu C. Y., Jin L. S. Dynamic numerical simulation of cutterhead loads in TBM tunnelling. Tunnelling and Underground Space Technology. 2017, vol. 70, pp. 286— 298. DOI: 10.1016/j.tust.2017.08.028.

6. Roby J., Willis D. Achieving fast EPB advance in mixed ground. A study of contributing factors. Proceedings North American Tunneling. 2014, pp. 182—194.

7. Tumac D., Balci C. Investigations into the cutting characteristics of CCS type disc cutters and the comparison between experimental, theoretical and empirical force estimations. Tunnelling and Underground Space Technology. 2015, vol. 45, pp. 84—98. DOI: 10.1016/j. tust.2014.09.009

8. Huo J., Hanyang W., Jing Y., Wei S., Guangqing L., Xiaolong S. Multi-directional coupling dynamic characteristics analysis of TBM cutterhead system based on tunnelling field test. Journal of Mechanical Science and Technology. 2015, vol. 29, no. 8, pp. 3043—3058. DOI: 10.1007/ s12206-015-0701-1.

9. Nosenko A. S., Domnickiy A. A., Altunina M. S., Zubov V. V. Theoretical and experimental research findings on batch-operation bin loader with hydraulically driven conveying element. MIAB. Mining Inf. Anal. Bull. 2019, no. 11, pp. 119-130. [In Russ]. DOI: 10.25018/0236-14932019-11-0-119-130.

10. Nosenko A. S., Domnitsky A. A., Khazanovich V. G., Nosenko V. V., Zubov V. V., Kirsanov I. A. Patent RU 2702211 IPC B65G11/02. 04.10.2019. [In Russ].

11. Nosenko A. S., Domnitsky A. A., Nosenko V. V., Altunina M. S., Zubov V. V. Patent RU 2724041, IPC B65G 25/08. 18.06.2020. [In Russ].

12. Boyarkina I. V. Technologicheskaya mekhanika odnokovshovykh frontal'nykh pogruzchikov: monografiya [Technological mechanics of single-bucket front-end loaders: monograph. Omsk, SibADI, 2011, 336 p.

Подписка на рассылку

Раз в месяц Вы будете получать информацию о новом номере журнала, новых книгах издательства, а также о конференциях, форумах и других профессиональных мероприятиях.